Nozzle Body — Threaded Body and Seat Machining
Final section of the melt path, carrying the heater band up to the sprue.
View details
Sets the orifice that decides shear, drool and stringing at the gate.
Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.
Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.
No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.
The tip decides how the melt leaves the machine. Orifice size sets fill rate and shear; the seat radius sets how cleanly the tip breaks away from the sprue bushing.
| Type | Seals by | Use it for |
|---|---|---|
| Open / straight through | Nothing — free flow | Commodity resins, short cycles, drool is acceptable |
| Spring shut-off | Spring closes the needle when injection pressure drops | Low viscosity resins, engineering grades |
| Needle shut-off, actuated | External actuator opens and closes positively | Large orifices, high flow, no drool permitted |
| Parameter | Typical range | Note |
|---|---|---|
| Orifice diameter | Chosen against fill rate and filler size | Must clear the filler or the seat erodes |
| Seat radius | Matched exactly to the sprue bush radius | A mismatch leaves a ring of flash at the gate |
| Land length | Short land breaks cleaner, long land controls shear | Set with the resin in mind |
| Tip material | Hardened tool steel or beryllium copper | Beryllium copper for heat transfer, steel for wear |
Final section of the melt path, carrying the heater band up to the sprue.
View details
Reaches the sprue when the standard nozzle cannot; heated or unheated.
View details
Nozzle bodies, replaceable tips, adapters and mold clamps in standard and special sizes, matched to your machine and mold.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.