Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
General Purpose Screw for PP, PE and ABS
Screws for Injection Molding

General Purpose Screw for PP, PE and ABS

Three-zone screw for commodity and engineering resins where steady output matters more than dispersion.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

A general purpose screw is the conventional three-zone design: feed, compression and metering on a single flight. It is the right choice for commodity resins — PP, PE, PS, ABS and their blends — where the priority is steady output rather than fine dispersion.

Geometry

ParameterTypical rangeHow it is set
Screw diameterMatched to the barrel bore you are runningMeasured from your drawing or the worn screw
L/D ratioUsually 20:1 to 25:1 for injection moldingLonger L/D gives more melting length; the machine barrel limits the maximum
Compression ratioAbout 2.0 to 3.0 for commodity polyolefinsRaised for crystalline resins, lowered for heat-sensitive ones
Feed depthDeep channel, roughly 0.12 to 0.18 times diameterSet so the solids can be conveyed without bridging
Metering depthFeed depth divided by the compression ratioShallow enough to build pressure, deep enough not to shear-burn
Flight pitchUsually around one diameterChanged when the resin needs a different conveying angle

Where it works

Parts that do not demand tight color control, thin-wall filling or high shear mixing. If your rejects come from unmelt, color streaks or unmixed masterbatch, a general purpose screw is usually the wrong tool — a barrier or mixing design will fix it more cheaply than process tuning ever will.

When it stops being enough

  • Output falls while the melt temperature climbs. That is a sign the melting length is too short for the cycle you are asking for, not a heater problem.
  • Color takes several shots to clear after a change. The metering section is not mixing.
  • Thick sections show unmelted cores at the gate. A three-zone profile cannot separate solid from melt the way a barrier flight can.

What we need from you

  • Machine model, or the screw diameter and L/D ratio.
  • The resin or resin family you run most often.
  • Typical shot weight and cycle time.
  • A drawing or photograph of the existing screw, if you have one.

We cut the flight geometry to suit those inputs and confirm the drawing before machining starts.

Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

General Purpose Screw for PP, PE and ABS Quoted to confirmed specs