Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Centron Engineering News & Articles

How a Centron Screw Is Made: From Drawing to Dispatch

Machining and inspection of screws and barrels

When buyers compare screw and barrel suppliers, the real question behind the quotation is "how do you control quality". Rather than promises, here is the process itself: what happens at each stage, what gets checked, and what records leave with the shipment.

Stage 1: specification before quotation

Engineering reviews every enquiry before pricing: the machine model or bore diameter, screw length and L/D, the resin and filler loading, and the drawing, sample or part number. We return a complete dimension list and material proposal in writing. Anything uncertain - a bore that has not been measured, an unclear compound - is flagged for measurement or written confirmation rather than assumed from averages. All dimensions are confirmed in writing before steel is cut.

Stage 2: blanking and rough machining

Base steel is cut to the confirmed route, then rough-turned. Straightness is established as a reference on the bench at this stage, together with the drive-end connection and feed-throat alignment. Straightness errors are cheapest to correct before finishing.

Stage 3: finishing and treatment

  • Screws: flight profile turning, OD grinding, special zones (barrier, mixing) machined to the confirmed drawing.
  • Barrels: boring and honing of the bore to tolerance, feed opening, heater band layout and nozzle bore machined to the machine's configuration.
  • Treatment runs per order - nitriding, bimetallic overlay or hard chrome - with same-batch coupons accompanying the process as the inspection basis.
  • Mating features (tip threads, check-ring fits) are finished after treatment so assembly precision holds.

Stage 4: pre-dispatch inspection

ItemMethod
Bore diameter and toleranceDial bore gauge, multi-section along full length
Bore finishProfilometer before dispatch
Flight outside diameterMicrometer at matching positions
Case depth and surface hardnessMeasured on same-batch coupons
StraightnessDial-indicated on the bench over full length
Liner thickness and bondMeasured before and after machining; ultrasonic check available
Check-ring assembly fitsVerified pair-wise against drawing

Stage 5: records with the shipment

Each batch ships with an inspection record comparing measured dimensions to the drawing, plus a mill certificate on request. Two uses: verifying dimensions at installation, and serving as the dimensional baseline for every future overhaul of that machine.

Repeat orders and support

Single-piece replenishment and batch production both supported. Dimensions and drawings stay on file, so repeat orders go straight to production without re-confirmation. When something runs abnormally in service, compare against the inspection record first, then the process - that is the order we recommend.

The same flow applies to screws, barrels, screw tip assemblies and nozzle bodies. Specifications and lead times are confirmed in writing.

Ready to start a specification? Send the machine model and resin and we will begin from the written dimension list.