Cartridge Heaters — High Watt Density
High watt density cartridge heaters up to 25 W/cm2 with 316L or Incoloy sheath options, for hot runner nozzles, fast-cycle molds and tight spaces.
View details
High watt density cartridge heaters up to 25 W/cm2 with 316L or Incoloy sheath options, for hot runner nozzles, fast-cycle molds and tight spaces.
Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.
Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.
Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.
When the hole is small but the heat demand is large, watt density has to go up. These cartridges are wound with a finer resistance wire and a denser magnesium oxide fill, so the same 10 mm diameter that carries 200 W in a standard element can carry 600 W.
| Parameter | Range |
|---|---|
| Diameter | 3 - 20 mm, including 6.5 and 8 mm hot runner sizes |
| Watt density | 15 - 25 W/cm² |
| Sheath | 304 SS, 316L SS, Incoloy 800 for corrosive service |
| Maximum sheath temperature | 800 °C (short cycle) |
| Tolerance | Diameter -0.02 / -0.05 mm on request |
| Sensor | Integrated type J or K, tip sensitive |
High watt density shortens element life if the fit or the control is poor. The sheath runs hotter, so scale, resin drool or a loose hole will burn it out quickly. Use a controller with fast sampling and a properly placed thermocouple, keep the cold zone outside the heated block, and expect to replace these more often than a standard cartridge in the same application. That is the honest cost of packing the power in.
If the bore allows it, a standard watt density cartridge will outlast it. If the application is a hot runner, see also hot runner control systems.
High watt density cartridge heaters up to 25 W/cm2 with 316L or Incoloy sheath options, for hot runner nozzles, fast-cycle molds and tight spaces.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.