Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Nitrided Barrel for Commodity Resins
Barrels for Injection Molding

Nitrided Barrel for Commodity Resins

Hardened bore for commodity and engineering resins without aggressive fillers.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

A nitrided barrel is the standard economical construction: a 38CrMoAlA tube, bored and honed, then gas nitrided so the bore carries a hard case over a tough core. The case resists abrasion; the core keeps the barrel from cracking under hoop stress.

Construction data

ParameterTypical rangeConfirmed at order
Base material38CrMoAlA (JIS SACM645) or equivalentMill certificate supplied on request
Case depthCommonly 0.3 to 0.6 mm on the boreMeasured on a test coupon from the same batch
Surface hardnessCommonly HRC 56 to 58 bandVerified after nitriding
Bore finishHoned, typically Ra 0.4 µm or betterChecked with a profilometer before dispatch
StraightnessControlled along the full lengthDial-checked on the bench
Bore toleranceSet against the screw clearanceAgreed on the drawing

What it handles well

  • Unfilled commodity resins: PP, PE, PS, ABS, and their blends.
  • General purpose and barrier screws in the same barrel material.
  • Applications where the budget matters and the filler content is low or zero.

Where it falls short

  • Glass and mineral filled compounds. The filler abrades the case faster than the case can resist, and once the case is through, wear accelerates.
  • Corrosive resins and PVC, where the nitride layer offers no chemical protection.
  • Very long uninterrupted runs on abrasive material — a bimetallic liner will outlast it.

Making it last

Most nitrided barrels we replace were not worn out by the resin. They were worn out by heat: a drifting thermocouple that ran the zone hot softened the case, and after that the wear is rapid. Check the heater bands and thermocouples before blaming the barrel.

Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Nitrided Barrel for Commodity Resins Quoted to confirmed specs