Barrel Blankets — Removable Insulation
Removable barrel insulation blankets for injection molding machines, rated 200 C continuous, hook-and-loop closure, typically cutting barrel heating...
View details
Removable barrel insulation blankets for injection molding machines, rated 200 C continuous, hook-and-loop closure, typically cutting barrel heating...
Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.
Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.
Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.
A barrel blanket is the fastest energy project available to any injection molder. The heating bands on an unprotected barrel radiate heat into the shop; an insulated jacket keeps it in the steel, shortens heat-up time and stabilises zone temperature.
| Property | Value |
|---|---|
| Outer shell | Silicone coated fiberglass cloth, oil and coolant resistant |
| Insulation | Needle-punched fiberglass, 10 - 25 mm |
| Continuous service temperature | 200 °C (392 °F), short excursion to 230 °C |
| Closure | Hook-and-loop, with draw cord on long sections |
| Fasteners | Brass grommets, spring hooks, optional stainless buckles |
| Cut-outs | Made to clear heater terminals, thermocouples and nozzle access |
Measured savings depend on barrel size, set temperature and shop draughts, but 30 - 50% of barrel heating energy is the usual band, with payback inside a few months on a machine running three shifts. Two secondary effects matter just as much: zone temperatures hold tighter because the controller is no longer fighting radiant loss, and the shop floor gets noticeably cooler around the machine.
Blankets are made to the barrel profile, not to the machine model, because barrel geometry changes with screw diameter and OEM. Send a sketch with the heated length, the outside diameter of each zone, and the position of heater terminals. We mark each blanket with the zone number so installation is unambiguous.
For related barrel hardware see mica barrel heater bands and barrels for injection molding.
Removable barrel insulation blankets for injection molding machines, rated 200 C continuous, hook-and-loop closure, typically cutting barrel heating...
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.